200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。     

In the theory of blast waves

The behavior of the blast wave from an exploding spherical volume is investigated mathematically over the entire range of blast-wave propagation. The computational method uses analytical results for a similar problem for a point explosion with counter pressure and the theory of an asymptotically equivalent point explosion. The asymptotic solution of the gas-dynamic equations away from the explosion site is matched to the initial conditions of blast-wave formation due to the disintegration of the detonation shock upon its arrival at the boundary of the exploding volume. The spatial distribution of the blast-front pressure is found for combustible gaseous systems and solid explosives. The theoretical results obtained agree quantitatively with available experimental measurements. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 93–99, July–August, 2006.     

唐山建龙900mm冷轧机组的工艺与设备

较系统地介绍了我国第1条国产化的中宽带钢冷连轧生产线，即唐山建龙钢铁控股有限公司900mm冷连轧生产线的工艺流程、主要设备组成及技术特点。重点介绍了900mm 4机架六辊轧机的技术参数、性能特点及自动控制系统。该生产线投产以来，取得了较好效果。     

中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

实用宽带新技术

简要介绍了三种宽带新技术及其应用，包括替代五类线的VDSL，可解决HFC上行噪音漏斗效应的SCDMA技术以及利用电源线传输高速数据的PLC技术。这些新技术由于具有较高的性能价值比和广阔的应用前景，受到了广泛的关注。     

从引进610ERW机组透视东西方技术价值观念的差异

我国引进的610ERW机组大多来自欧美和日本等国,其工艺参数和设备结构有所不同,例如成型机、高频焊机、中频正火装置、连续与非连续生产方式、全线设备(入口段、成形段和精整段)组成的匹配模式以及设备国产化的程度等.通过对东西方有关高频电阻焊技术价值观念差异的分析,总结我国引进610ERW机组的经验,为今后企业引进、消化引进和技术创新提供参考.     

Signed line intercept count

Elements of surfaces that bound a phase (β) in a two phase mixture (α+β) may be classified as: (a) convex (++) if both principal curvatures are positive; (b) concave (? ?) if both are negative; and (c) saddle (+ ?) if one is positive and the other negative. This classification excludes the limiting cases for which one or both of the principal curvatures is zero. The traces of these surfaces that form the boundaries of the β areas on a representative two dimensional section may also be: (a) convex (+) if the local curvature is positive; or (b) concave (?) if it is negative. Line intercepts may be tabulated separately for intersections with convex (+) and concave (?) segments of boundary. This paper presents a derivation of fundamental stereological formulae that relate these counting measurements to three-dimensional geometric properties of the structure they sample.     

隔河岩水电厂220 kV线路保护配置及运行分析

介绍了隔河岩电厂220kV线路保护的原理设计及运行情况，以及采用了双重微机化继电保护装置后带来的优越性，简要描述了CSL-101A高频保护和RCS-931A光纤保护的应用特点。     

Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

两相电流互感器配电网零序电流构造方法

中性点非直接接地配电网大多只安装A，C两相电流互感器（TA），而现有单相接地故障选线方法基本都以零序电流为基础实现。如何在两相TA配电网中准确检测并隔离接地故障线路，成为长期困扰实际运行的技术难题。通过对暂态电流的频域和时域分析，找出B相暂态电流与A，C相暂态电流的对应关系，提出在A相和C相接地时由A相和C相暂态电流构造B相暂态电流，进而得到较精确零序电流的方法。通过大量仿真实验验证了所提出的构造方法的正确性。零序电流的成功构造为实现两相TA配电网单相接地故障选线提供了基础。